Web Booth Creator

Work In Progress

This documentation is still being completed. The steps below cover the current workflow but some image slot details are pending.

Introduction

The Web Booth Creator lets you create and customise PJKT booths directly in your browser — no Unity experience needed. You upload images for each slot in the booth template and the tool assembles the result.

Getting Started with the Editor

Using the Web Booth Creator

🌐

Step 1 — Access the Booth Editor

Go to https://booth.projektcommunity.com/ to open the web booth editor.

🔑

Step 2 — Log In

① Enter your registered email② Enter your password③ Click Login✓ You'll see your username and the image upload panel

🎯

Step 3 — Upload Your Images

In the right panel, locate each image slot and click Choose File to pick your image. Each slot has a required pixel size — see the table below.

⬆️

4. Upload Your Work

Click the "Upload" button at the bottom of the panel to submit all your selected images.

Upload buttons or 3D preview not Showing?

If you don't see a 3D preview of your booth after uploading images, you may need to enable Hardware acceleration in your web browser:

1. Open your browser settings
2. Enable "Hardware acceleration" (or "Use hardware acceleration when available")
3. Restart your browser completely after enabling this setting
4. Return to the booth editor

Most modern browsers require hardware acceleration, which the 3D preview depends on.

🖼️ Image Slots

Each slot in the booth template has a fixed pixel size. Images that do not match will be stretched.

TIP

Use the "DOWNLOAD TEMPLATE IMAGES" button to download a zip file with correctly sized placeholder images for each slot. You can design your booth by replacing these placeholders with your own images in your design tool, then export at the same pixel dimensions.

📁 Image Requirements

• Accepted formats: PNG, JPG
• Colour space: sRGB
• Match the pixel dimensions shown for each slot

❓ Troubleshooting

🔴

Images look stretched

Your image does not match the required slot dimensions. Export from your design tool at the exact pixel size shown next to that slot's file picker.

💬

Still stuck?

Ask in the representative channels of the PJKT Discord.